End User Certificate

HOME Manufacturers Products Specials Training

Services Downloads Contacts Sitemap

CTS Launchers and Launching Cups

CTS Launchers

CTS 37mm Tactical Launchers

MODEL TL-1 SINGLE SHOT
A rugged and reliable launcher designed to fire all CTS 37/38mm cartridges as well as other compatible rounds. It is equipped with a trigger lock for safety and a barrel release latch that can be operated from both sides of the launcher. The TL-1 can launch various grenades when fitted with an appropriate launching cup and using a launching cartridge. The TL-1 is available with a composite fixed stock.

CTC TL-1
MODEL TL-8 MULTI-SHOT
This tactical launcher can fire up to six rounds in rapid succession. It provides law enforcement users the security of having six rounds at their immediate disposal, reducing the risk of escalation between reloads. It can launch all 37/38mm cartridges up to 8 inches long. The TL-8 is equipped with a trigger lock. Keeping the percussion primer on the cartridge and the firing pin out of line until a full trigger pull is performed, provides additional safety. This mechanism virtually eliminates the risk of accidental discharge from rough handling. The TL-8 is an excellent and cost effective force multiplier.
CTS TL-8

MODEL PL-8 MULTI-SHOT
The PL-8 is a pump action instead of a spring loaded magazine providing positive feed without the need for manual winding

CTC PL-8 37mm Launcher

Physical Specifications
TL-1 TL-8 PL-8
Operating System Single Shot Action Spring Motor driven Magazine Pump Action Magazine
Safety Trigger Lock Trigger Lock. Out of Line Mechanisim Trigger Lock. Out of Line Mechanisim
Calibre 37/38mm 37/38mm 37/38 mm
Weight 2.24 kg (6.0lb) 3.73 kg (10.3 lb) 4.1 kg (11 lb)
Total Length 749.3mm (29.5") 838.2mm (33") 863.6mm (34")
Barrel 355.6mm (14") Smooth Bore 228.6mm (9") Smooth Bore 304.8mm (12") Smooth Bore
Ejection Extractor Assisted Gravity Gravity

Part Numbers & Spec Sheets
CTS TL-1 & TGL-1 Launchers CTS TL-8 & TGL-6 Launchers CTS PL-8 & PGL-65

Top of Page

CTS 40mm Tactical Launchers
With today's interest in target specific munitions, the rifled 40mm system is gaining rapid popularity. It is able to deploy all the recently developed, direct fire impact and barricade rounds, as well as all of the traditional crowd control & pyrotechnics gas rounds. CTS offers three 40mm Launchers to meet the needs of todays law enforcement professional.

MODEL TGL-1 SINGLE SHOT
A rugged and reliable top break design equipped with an ambidextrous barrel release mechanism. This system is compatible with all 40mm MIL SPEC rounds. The TGL-1 is a double action only launcher that incorporates a new iron sight, adjustable for windage and elevation, and will also accept Picatinney ready optical sights.

The TGL-1 40mm launcher designed to be compatable with all MIL SPEC less-lethal rounds. It is equipped with a trigger lock for safety and a barrel release latch that can be operated from both sides of the launcher. The TGL-1 can launch various grenades when fitted with an appropriate launching cup and using a launching cartridge. The TGL-1 is available with a composite fixed stock.

CTC TGL-1

MODEL TGL-6 MULTI-SHOT
The TGL-6 tactical launcher is a rotary, spring loaded 6 shot magazine system that can fire up to six 40mm rounds in rapid succession. The TGL-6 provides law enforcement users the security of having six rounds at their immediate disposal, reducing the risk of escalation between reloads. It can launch all MIL SPEC less-lethal rounds.

The TGL-6 is equipped with a trigger lock. Keeping the percussion primer on the cartridge and the firing pin out of line until a full trigger pull is performed, provides additional safety. This mechanism virtually eliminates the risk of accidental discharge from rough handling. The TGL-6 is an excellent and cost effective force multiplier.

CTS TGL-6

MODEL PGL-65 40mm LAUNCHER
The PGL-65 is a pump action 6 shot rotary system which eliminates the necessity of winding a spring loaded magazine.

CTC PGL-65 40mm Launcher

Physical Specifications
TGL-1 TGL-6 PGL-65
Operating System Single Shot Action Spring Motor driven Magazine Pump Action Magazine
Safety Trigger Lock Trigger Lock. Out of Line Mechanisim Trigger Lock. Out of Line Mechanisim
Calibre 40mm 40mm 37/38 mm
Weight 2.24 kg (6.0 lb) 3.7 kg (9.9 lb) 4.85 kg (11 lb)
Total Length 749.3mm (29.5") 838.2 mm (33") 863.6 mm (34")
Barrel 355.6mm (14") Rifled Bore 228.6 mm (9") Smooth Bore 304.8 mm (12") Smooth Bore
Ejection Extractor Assisted Gravity Gravity

Part Numbers & Spec Sheets
CTS TL-1 & TGL-1 Launchers CTS TL-8 & TGL-6 Launchers CTS PL-8 & PGL-65

Top of Page

52 Series & 62 Series Launching Cups
CTS LC5 & CTS LC6 Launching Cups

Description

Along with our line of canister grenades we also produce a full line of launching cups. The LC5 & LC6 launching cups are designed for the 52 & 62 series grenades respectively. The cups can be attached to virtually any 12ga shotgun, and and the munition launched with our Model 2600 launching cartridge.

Operation
These rounds can be fired from most 12ga smoothbore shotguns such as the Remington 870 and Mossberg 500.

Danger
Do not launch grenades directly at person(s). Serious injury or death may result. For use only by qualified personnel trained in the use of these products.

CTS LC-5 Launching Cup
CTS LC-5 Launching Cup

CTS LC-6 Launching Cup
CTS LC-6 Launching Cup

Physical Specifications (LC-5) Physical Specifications (LC-6)
Overall Height: 7.4" (188mm) Overall Height: 6.8" (173mm)
Diameter: 2.95" (75mm) Diameter: 2.6" (66mm)

Part Numbers & Spec Sheets CTS LC-5 Launching Cup CTS LC-6 Launching Cup

Top of Page

82 Series & 92 Series Launching Cups
CTS LC8 & CTS LC9 Launching Cups

Description

Along with our line of canister grenades we also produce a full line of launching cups.

The LC8 launching cup has two basic purposes. One is to be a launching cup for the 82 Series Lauched grenades, and the other is to be a stand-off for the Model 2570 Door Breaching round.

The LC9 Launching cup is designed to launch any of our 92 Series rubber ball grenades, with the use of the Model 2600 Launching Cartridge.

Operation
These rounds can be fired from most 12ga smoothbore shotguns such as the Remington 870 and Mossberg 500.

Danger
Do not launch grenades directly at person(s). Serious injury or death may result. For use only by qualified personnel trained in the use of these products.

CTS LC8 Launching Cup
CTS LC-8 Launching Cup

CTS LC9 Launching Cup
CTS LC-9 Launching Cup


Physical Specifications CTS LC-8 Physical Specifications CTS LC-9
Overall Height: 203mm 8" Overall Height: 183mm (7.2")
Diameter: 38.6mm (1.52") Diameter: 86mm (3.4")

Part Numbers & Spec Sheets CTS LC-8 Launching Cup CTS LC-9 Launching Cup

Click the product family you are interested in to jump to that products section

12ga

37mm

40mm

52 Series

62 Series

82 Series

92 Series

72 Series

Aerosol

Launchers

CTS M201 Fuze

CTS Logo


Top of Page

ARWEN® is a Registered Trademark of Police Ordnance Company Inc.

 

Copyright © - Police Ordnance Company Inc. (905-479-2223) All Rights Reserved

Developed By O·S·Dynamics